How much power chiller does the 240T-400T injection molding machine match 5HP Chiller




The clamping force of the injection molding machine is 240T-400T, and the molding capacity is 24KG-40kg/H. If it is an air-cooled chiller, choose 5HP cooling capacity, and the model is XYFL-05. If it is a water-cooled chiller, choose 5HP cooling capacity. The model is XYSL-05. The water-cooled chiller needs to be connected to a pipeline water pump and a water tower. The air-cooled chiller can be used independently and is easy to install.

 

Core parameters of XYFL-05,5HP air-cooled chiller:

Refrigeration capacity: 15KW, compressor power: 5HP/3.75KW, voltage frequency: 3PH-380V-50HZ (you can consult customer service to customize voltage frequency according to different countries), compressor brand: Panasonic, water tank capacity: 65L, evaporator structure: Coil type, condenser structure: fin type, water pump power: 375W, refrigerant model: R22 (you can consult customer service to customize environmentally friendly refrigerants), inlet and outlet diameter: DN25, weight 180KG.



The following is the method of selecting a water-cooled chiller for a standard injection molding machine:

When the cooling water temperature of the injection molding machine is controlled at 5-10°C, the 1HP cooling capacity chiller is matched with 80T.

When the cooling water temperature of the injection molding machine is controlled at 10-15°C, the 1HP cooling capacity chiller is matched with 100T.

When the cooling water temperature of the injection molding machine is controlled at 15-20°C, the 1HP cooling capacity chiller is matched with 120T.



Standard injection molding machine optional air-cooled chiller method:

When the cooling water temperature of the injection molding machine is controlled at 5-10°C, the 1HP cooling capacity chiller is matched with 64T.

When the cooling water temperature of the injection molding machine is controlled at 10-15°C, the 1HP cooling capacity chiller is matched with 80T.

The cooling water temperature of the injection molding machine is controlled at 15-20°C, and the 1HP cooling capacity chiller is matched with 96T.

 

XYSL-05,5HP water-cooled chiller core parameters:

Refrigeration capacity: 15KW, compressor power: 5HP/2.25KW, voltage frequency: 3PH-380V-50HZ (you can consult customer service to customize voltage frequency according to different countries), compressor brand: Panasonic, water tank capacity: 60L, evaporator structure: Coil type, condenser structure: shell and tube type, water pump power: 375W, refrigerant model: R22 (you can consult customer service to customize environmentally friendly refrigerants), inlet and outlet diameter: DN25, weight 160KG.



Standard injection molding machine features: hydraulic pump motor is used, the molding speed is average, the molding time is about 10 seconds, but the maximum clamping force can reach several thousand tons.

Features of high-speed injection molding machine: It adopts oil-electric hybrid power of oil pump and servo motor, and the molding speed is fast. For example, the molding time is about 6 seconds, and the clamping force is currently within 850 tons.



High-speed injection molding machine matching method:

Water cooling is 0.62 times that of standard injection molding machines, and air cooling is 0.55 times that of standard injection molding machines.

 

Selection method of high-speed injection molding machine and water-cooled chiller:

1HP refrigerating capacity of chiller power standard 50T clamping force injection molding machine (5-10℃)

1HP refrigerating capacity of chiller power standard 62T clamping force injection molding machine (10-15℃)

1HP refrigerating capacity of chiller power standard 75T clamping force injection molding machine (15-20℃)



Selection method of high-speed injection molding machine and air-cooled chiller:

1HP refrigerating capacity chiller power is standard equipped with 45T clamping force injection molding machine (5-10°C)

1HP refrigerating capacity of chiller power standard 55T clamping force injection molding machine (10-15℃)

1HP refrigerating capacity chiller power standard 66T clamping force injection molding machine (15-20℃)

 

For example: a pair of molds produces PP products, and the production capacity is 50KG per hour. What is the cooling capacity required? What size should a high-speed injection molding machine be suitable for?

Q=50×0.48×200×1.35=6480 (kcal/h)

The cooling capacity is 6480kcal/h per hour, and the cooling capacity of the optional chiller is greater than 6480kcal/h, 6480÷860=7.5KW=3.2HP, so choose a chiller with a cooling capacity of 3-5HP.

 

Summary: 5HP chiller applied to injection molding machine can improve production efficiency, reduce product defects, protect equipment life, save energy and many other functions. It is a very practical equipment. At the same time, it can also reduce machine fatigue and damage and prolong machine life; while recycling cooling water can save energy and resources and achieve environmental protection.









Navigation