What power chiller does the 60KG extruder match?




The chiller can be divided into two types in the application of the extruder, one is to cool the extrusion die head, and this one can use a standard chiller. There is another type of water tank for cooling the extruder line groove. This model needs to use a shell-and-tube chiller (the evaporator is a shell-and-tube closed type). Jiusheng will teach you to match the corresponding power of the extruder with a 60KG output. Chiller. Extrusion capacity 60KG/H. The chilled water flow rate is 1.5m³/H. If it is an air-cooled chiller, choose 3HP cooling capacity, and the model is JSFL-03. If it is a water-cooled chiller, choose 3HP cooling capacity. The model is JSSL-03. The water-cooled chiller needs to be connected to a pipeline water pump and a water tower. The air-cooled chiller can be used independently and is easy to install.

SFL-03, 3HP air-cooled chiller parameters: (standard type, shell and tube type parameters need to be confirmed with customer service)
Refrigeration capacity: 9KW, compressor power: 3HP/4.5KW, voltage frequency: 3PH-380V-50HZ (you can consult customer service to customize voltage frequency according to different countries), compressor brand: Panasonic, water tank capacity: 50L, evaporator structure: Coil type/(shell and tube) condenser structure: fin type, water pump power: 375W, refrigerant model: R22 (you can consult customer service to customize environmentally friendly refrigerants), inlet and outlet diameter: DN25, weight 160KG.

Structural diagram of air-cooled shell-and-tube chiller (refer to the picture, the power size is subject to the actual product)

Application diagram of extruder matching chiller

JSSL-03, 3HP water-cooled chiller parameters: (standard type, shell and tube type parameters need to be confirmed with customer service)
Refrigeration capacity: 9KW, compressor power: 3HP/2.25KW, voltage frequency: 3PH-380V-50HZ (you can consult customer service to customize voltage frequency according to different countries), compressor brand: Panasonic, water tank capacity: 50L, evaporator structure: Coil type, condenser structure: shell and tube type, water pump power: 375W, refrigerant model: R22 (you can consult customer service to customize environmentally friendly refrigerants), inlet and outlet diameter: DN25, weight 140KG.

Schematic diagram of the structure of the water-cooled shell-and-tube chiller (refer to the picture, the power size is subject to the actual product)

Working principle diagram of extruder and chiller

Summary: Chillers applied to extruders can improve the production efficiency of wire rod forming, and are suitable for extruders of insulating materials such as PVC, LDPE, XLPE, LSHF, and TPU. Generally, extruders choose to use chillers to cool down, and the effect is more stable than external circulating water.
And it also has the functions of reducing temperature, improving efficiency, protecting equipment, improving product quality, energy saving and environmental protection, etc., which plays an important role in the extrusion process. Recycling cooling water can save energy and resources and realize environmental protection.

If there is any industry that needs cooling, but you don’t know how much power to match, you can leave a message to us, or contact plus friends +86-13925748878 (same number on WeChat)/(same number on whatsapp), email: jiusheng@dgchiller.com, we will Will provide you with technical solutions. Looking forward to your consultation, thank you!

Navigation