What power chiller does the 600KG extruder match?

The chiller can be divided into two types in the application of the extruder, one is to cool the extrusion die, and this one can use a standard chiller. There is another type of water tank for cooling the extruder line groove. This model needs to use a shell-and-tube chiller (the evaporator is a shell-and-tube closed type). Jiusheng will teach you to match the corresponding power of the 600KG extruder Chiller. The extrusion capacity is 600KG/H. The chilled water flow rate is 15m³/H. If it is an air-cooled chiller, choose  30HP cooling capacity, and the model is JSFL-30. If it is a water-cooled chiller, choose 30HP cooling capacity. The model is JSSL-30. The water-cooled chiller needs to be connected to a pipeline water pump and a water tower. The air-cooled chiller can be used independently and is easy to install.

JSFL-30, 30HP air-cooled chiller parameters: (standard type, shell and tube type parameters need to be confirmed with customer service)
Refrigeration capacity: 90KW, compressor power:  30HP/22.5KW, voltage frequency:  30HP (you can consult customer service to customize voltage frequency according to different countries), compressor brand: Panasonic, water tank capacity: 300L, evaporator structure: Coil type/(shell-and-tube) condenser structure: fin type, pump power: 2200W, refrigerant model: R22 (you can consult customer service to customize environmentally friendly refrigerants), inlet and outlet diameter: DN65, weight 1050KG.

JSSL-30, 30HP water-cooled chiller parameters: (standard type, shell and tube type parameters need to be confirmed with customer service)
Refrigeration capacity: 90KW, compressor power: 30HP/22.5KW, voltage frequency:  30HP (you can consult customer service to customize voltage frequency according to different countries), compressor brand: Panasonic, water tank capacity: 270L, evaporator structure: Coil type, condenser structure: shell and tube type, water pump power: 2200W, refrigerant model: R22 (you can consult customer service to customize environmentally friendly refrigerants), inlet and outlet diameter: DN65, weight 880KG.

Air-cooled chiller reference diagram
Application diagram of extruder matching chiller


Working principle diagram of extruder and chiller

Summary: The application of the chiller to the extruder can improve the production efficiency of product molding, and it is also suitable for the extruder of insulating materials such as PVC, LSHF, TPU, LDPE, and XLPE. The extruder for single-color, double-color, double-layer and three-layer extrusion operations of wire and cable is a very practical device for cooling, protecting the life of the equipment, saving energy and so on. Recycling cooling water can save energy and resources and realize environmental protection.

If there is any industry that needs cooling, but you don’t know how much power to match, you can leave a message to us, or contact plus friends +86-13925748878 (same number on WeChat)/(same number on whatsapp), email: jiusheng@dgchiller.com, we will Will provide you with technical solutions. Looking forward to your consultation, thank you!