Frequently asked questions about the use of industrial water coolers: When operating an industrial water cooler, you should try to avoid turning it on and off repeatedly. When the temperature of the industrial water cooler exceeds the set temperature, the compressor will stop running on its own. This is a normal situation. The temperature The switch should be prevented from being set below 5°C to prevent the air conditioner evaporator from freezing (the low-temperature freezer is not included).
In order to ensure the cooling effect and maintain the best condition, please clean the cooler, air conditioner evaporator and filter regularly. The frozen centrifugal water pump cannot be operated without water in the water tank (types above 7.5HP, in the water tank Equipped with water level protection, when the water level is too low or there is no water in the water tank, the centrifugal water pump will stop running on its own.
And display the water level fault code and signal. The transport medium of water coolers is generally water or ethylene glycol solution. The water-cooled machine generates air-conditioned cold/hot water through the outdoor host, and transports it to various terminal equipment indoors through the piping system. At the terminal equipment, the cold/hot water exchanges heat with the indoor air to generate cold/hot air, thereby eliminating the room air-conditioning load. .
Water cooler is an air conditioning system that centrally generates cold/heat and decentralizes the load of each room. The final equipment of the water cooler is generally a fan coil. The water cooler is similar to a household cabinet. The difference is that after the evaporator in the water tank cools the water or ethylene glycol solution outside the room, it passes through the water pipe to each room, and the cold water is then evaporated. The fan disk in the room exchanges heat and cold with the hot air in the room through the fan.