The use of industrial chillers must learn to master these skills




Industrial chiller is a kind of cooling water equipment that can provide constant temperature, constant current and constant pressure. The working principle of industrial chillers is to inject a certain amount of water into the water tank in the machine, and then cool the water through the refrigeration system of the industrial chiller, and then send the low-temperature cooling water to the equipment that needs to be cooled by the water pump. The chilled water of the industrial chiller takes the heat After leaving, the temperature rises and then flows back to the water tank to achieve cooling. When using it, you should master the following items.
1. During installation, please check whether the machine is damaged and choose a suitable place for easy installation and future maintenance.
2. The place where the unit is installed must be the floor, installation mat or foundation, whose levelness is within 6.4mm, and can bear the operating weight of the unit.
3. The unit should be placed in a room with a room temperature of 4.4-43.3℃, and there should be enough space around and above the unit for routine maintenance.
4. At one end of the unit, there should be space for pipe extraction to clean the condenser tube bundle, and door openings or other suitable openings can also be used.
5. Choose the water pipe with appropriate pipe diameter, the cooling system and cold water system when the unit is running at maximum power, and connect them correctly.
6. For ordinary applications, the water flow speed through the evaporator and condenser is allowed to be between 1.0-3.6m/s.
7. Under any load conditions, the water flow rate should remain stable.
8. The design and installation of all chilled water and cooling water pipelines should be carried out according to conventional methods. The chilled water pump should be located on the inlet pipe of the unit to ensure the positive pressure and flow rate in the unit. When piping, damping pipes should be installed to ensure proper flexibility, and to prevent the water from the evaporator from being drained when the pump is stopped.
9. The pipeline should have a firm support independent of the industrial chiller to avoid stress on the components of the industrial chiller. The hanger should be set up to facilitate pipe alignment.We produce quality 10HP Industrial Air Cooler.

Navigation